Building and Commercial
125 MM (5") submersible pumpset
“TEXMO” 6″ SUBMERSIBLE PUMPSETS are easy to install, noise free, efficient and require minimum maintenance. A wide range of pumps are available to meet diverse operating requirements. Motors are water lubricated and feature robust thrust bearings. Good quality materials are used to obtain a reliable life and provide maintenance free service.
| PARTICULARS | DETAILS |
|---|---|
| Bore size min. | 5”and above |
| Power Range | 2.0 to 10.0 HP |
| Voltage Range | 340V- 440V, AC Three phase , 50Hz (Upto10 HP) |
| Speed | 2900 RPM |
| Motor Type | Water filled and water cooled Induction motor |
| Coupling | Key / NEMA |
| Head | Maximum 70 M |
| Discharge | Maximum 800 LPM |
| No of Stages | Maximum 8 |
| Liquid temperature | Maximum 33ºC |
| Operating Pressure | 20 bar |
| Sand content in water | 50 PPM Max. |
| Pump Models | MC,NMC |
| Motor Models | CT,NCT |
- Water extraction from bores of diameter 5″ (125mm) and above
- Irrigation systems for Agriculture including Drip and Sprinkler systems.
- Pressure boosting applications
- Domestic water supply to large residences and multi storied apartments
- Water supply to commercial establishments like Hotels, Lodges and Hospitals Industrial water supply
- Dewatering of mines
- Industrial water supply
- Energy efficient motor
- Usage of Low watt In-house Manufactured Stampings
- Low operating cost (Low Power Consumption)
- Water lubricated motor with easily rewindable stator
- Energy Efficient mixed flow models
- Rubber diaphragm provided at the bottom of the motor to compensate thermal expansion of water
- Wide voltage operation to suit all seasons
- Pumpsets with special materials are available on request
| MOTOR | |
|---|---|
| Stator Shell | Stainless steel |
| Thrust Bearing | Carbon with stainless steel segments |
| Journal Bearings | Bronze/ Carbon |
| Diaphragm | Nitryle Rubber |
| Shaft | Carbon steel with SS extension |
| Strainers | Stainless steel |
| PUMP | |
|---|---|
| MC | |
| Pump shaft | Stainless steel |
| Valve casing | Cast Iron |
| Inlet bracket | Cast Iron |
| Bowl | Cast Iron |
| Impeller | Bronze / SS |